Kaffebox Flair Black Logo Pressure Gauge
Produsent: Kaffebox
What it does The gauge screws into the plunger stem on a Flair 49 PRO or Flair 58 and reads brew pressure live as you pull the lever. On a manual lever machine there is no pump holding pressure for you, so the gauge is the only direct feedback you get while the shot runs. The 5 to 9 bar band printed on the face is the working range for espresso, and keeping the needle inside it is what makes shots repeatable from one day to the next. When to replace one Pressure gauges are consumables in the same category as o-rings and silicone parts. Common reasons to swap one out are a needle that no longer rests at zero, a face that has fogged or filled with condensation, or physical damage from a drop. A gauge that reads consistently wrong is worse than no gauge, because you will chase the error with grind adjustments that were never the problem. Compatibility This is the 42 mm black gauge, which is specific to the Flair 49 PRO and Flair 58. It is not the same part as the gauge used with the Pressure Gauge Kit on the Classic, NEO Flex and Signature, and it does not fit the PRO 2. If you are unsure which machine you have, check the gauge diameter before ordering. Specifications Type Replacement pressure gauge Face diameter 42 mm Marked espresso range 5 to 9 bar Compatible machines Flair 49 PRO, Flair 58 Colour Black, branded face Included Pressure gauge only, no stem or piston
Butikk: www.kaffebox.no
Pris:
395.00
Gå til butikken